Increase your possibilities!
MD DARIO band saws, safe and simple to use, these are manual machines, run by an operator, designed and built to cut materials such as: solid wood, wood particle panels, fibre or plywood panels, even if covered with laminated plastics or borders. The sawing machine has 3 vulcanised fly wheels that permit the use of cutting blades of different sizes according to the type of cut to be made.
The sawing machine has 3 vulcanised fly wheels that permit the use of cutting blades of different sizes according to the type of cut to be made.
The SN33, SN44 and SV3 MAXI models can cut beams or carpentry pieces, the former with a maximum height of cm 31, 41 and 45, in maximum safety, with a special protection around the blade that safeguards the housing, in compliance with all standards and laws in force.
They are mainly used in carpentry, on building sites, in small handicraft and artistic laboratories, furniture factories and are suitable for both small hobby operations and for processing in series.
The main feature that distinguishes the MD DARIO sawing machine from conventional models is the ARTICULATED ARM that, with a special system of joints, allows the machine to rotate freely in all directions and at all angles so that the user can perform creative and very precise cuts.
Supports and devices created over time according to the requirements of the users have brought the MD DARIO sawing machines to the Top of the category, taking advantage of the following qualities:
• Easy movement in the workshop and on site.
• Possibility to rotate the machine around the part to be processed or blanked.
• Forward inclination of the machine up to 45° for angled cutting.
• Realisation of arcs and circumferences.
• Manual copying device placed under the blade guide for shaped contours and circumferences in series.
• Panel clamping with pneumatic pressure locks to cut small series in packs.
Consisting of a set of joints, the articulated arm is the tool that distinguishes all the MD DARIO machines and that makes it possible to easily rotate the sawing machine in any direction. It can be applied to the wall, and combined with SN33 / SN44 to form the AP 500 model, or with the Mobile Carriage T 1000 to create the SET 1500 and with a fixed or moving Column the SET 2000 can be obtained. As an optional, according to the size of the part to be processed or blanked, its length can be adjusted.
NEW Bellows type protection system
System to protect the blade with new bar for lifting. The protection can be adjusted, easily lifting or lowering it in complete safety.
NEW Suction system
Practical and functional, for efficient suction of the cutting residue produced during the process. Supplied on all SN33 / SN44 sawing machines for processes carried out on both bench and mobile sawing machines.