Band saw for stone
To cut up to 25 cm high
|Cutting width:||400 mm||400 mm|
|*Suggested cutting height for marble||150 mm||250 mm|
|*Suggested cutting height for granite||100 mm||200 mm|
|Hydraulic motor||Adjustable speed||Adjustable speed|
*The cutting heights are approximate, considering a professional and daily use of the machine. Cutting capacity thickness depends on the material type.
**Cutting speed depends on the type of material, the cutting height and the diamond wire employed.
Manual and easy to use, SET300 can be fixed on a column or on the ground. It is recommended to cut shapes, arcs and circumferences, since the articulated arm, moving around the column, allows to rotate the saw 360°. SET 300 includes:
- SAW SN33 OR SN44
- COPYING DEVICE
- BELLOW PROTECTION SYSTEM
- ARTICULATED ARM BS600
- ARC CUTTING DEVICE
- HYDRAULIC MOTOR WITH ADJUSTABLE SPEED
- TILTING DEVICE SR700M
- MATERIAL SUPPORT
- PRESSURE LOCK P-250
FEATURES OF OUR PRODUCTS
The articulated arm is the main feature of all MD DARIO® machineries. It allows the bandsaw to rotate in every direction.
The column enables to rotate 360° the machine, realizing multiple circular and shaped cuttings at the same time.
ARC CUTTING DEVICE
With the arc cutting device, made of a special metric bar, it is possible to cut arcs and circular shapes up to 360°.
Every MD DARIO® marble/granite set is supplied with the hydraulic motor, which enables the operator to use water in complete safety.
The use of the copying device is combined with the template application: the device is leaned on the template and it can reproduce the shape on more stone pieces.
BELLOW PROTECTION SYSTEM
The bellow protection system protects the wire and it can be regulated according to the cutting height, ensuring a safe work.
With the tilting device SR700M it is possible to tilt 45° the saw. The regulation can be easily make through a grade hand wheel adjuster. It must be considered that to higher inclination corresponds a lower side light.
A lever, connected to the hydraulic motor, allows the speed regulation of the diamond wire. In this way, it is possible to cut different materials with the proper speed.
The material support made of tubes that can be added or removed from the structure, enables to put on materials of different dimensions.
PRESSURE LOCK 250
The pressure lock 250 is a clamping bracket used to fasten the pieces to work.